• Product Overview

    The A101 is a high-precision Real-Time Locating System (RTLS) anchor utilizing Ultra-Wideband (UWB) wireless communication technology. Featuring a sleek ceiling-mount industrial design, it is optimized for high-precision indoor positioning across various sectors. The system supports the TDOA architecture, delivering a typical positioning accuracy of 10–30 cm.

    The A101 offers exceptional architectural flexibility, functioning as either a synchronization transmitter for Downlink TDOA or a receiving terminal for Uplink TDOA. In Downlink mode, the A101 supports autonomous offline operation, significantly reducing dependency on network infrastructure.

    Key Features

    1. Dual-Mode Support: Compatible with both Uplink and Downlink TDOA architectures to meet diverse business requirements.

    2. Precision Clock Synchronization: Utilizes proprietary synchronization technology to maintain a time error between anchors of less than 0.6 ns, ensuring centimeter-level stability.

    3. Flexible Networking: Equipped with built-in Wi-Fi; supports autonomous offline operation when configured as a Downlink TDOA anchor.

    4. Simplified Deployment: Features a standard USB Type-C 5V power interface, compatible with common 5V/1A power adapters to simplify onsite wiring.

    5. Smart Management: Supports USB HID for initial local configuration and network-based remote parameter tuning.

    6. IP Management: Supports both DHCP for automatic IP allocation and static IP assignment.

    7. Auto-Discovery: Capable of automatic discovery by the positioning engine.

    8. Standards Compliance: Each device features a unique EUI-64 ID; supports PAN ID filtering to exclude irrelevant UWB packets; fully compliant with IEEE 802.15.4-2011 standards.

    9. Advanced RF Tuning: Configurable UWB parameters including preamble length, PRF, and PAC to adapt to complex multi-path environments.

    10. Maintenance & Monitoring: Supports Over-the-Air (OTA) firmware updates; features an integrated status LED with adjustable brightness.


    Technical Specifications

    Category Item Specification
    Physical Specs Dimensions 73mm × 73mm × 30mm
    Power Input Voltage / Consumption 5V DC / < 1W
    Environment Operating Temp / Humidity -10°C to 60°C / 0% to 70% RH (Non-condensing)
    UWB RF Supported Channels Channel 5 / Channel 9
      Data Rate 850Kbps / 6.8Mbps
      Max Range Up to 100 meters (Line-of-Sight)
      Transmit Power < -85 dBm/MHz
    Connectivity Network Type Wi-Fi (DHCP / Static IP supported)
    Interface Communication USB Type-C (HID Protocol supported)

     

UWB Location NameCard Style Tag T1201C Circuit Diagram and PCB Diagram - Price: $150 USD

This tag is our best selling tag. In fact, we only mass-produced this TAG🤣

Use STM32F103CBT6 as the main control MCU, use the original DWM1000 module, and have built-in wireless charging.

We spent a lot of time on this tag and iterated on dozens of versions. The latest model is called T1206C(There are some small changes on the display of LED). The two LEDs (red/green) for charging indication are connected to GPIO control at the same time, which can be used as a breathing light and power shortage light.

This tag does not carry LNA/PA.

We provide the AD engineering files without LNA/PA name-card style tag's circuit diagrams and PCB diagrams, two versions of mass production engineering files, and other intermediate versions of engineering files.

工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片
工牌标签 T1201C的照片

In order to improve the coverage, we also designed an name-card style tag with LNA and PA. If needed, please click here: UWB Location NameCard Style Tag T1205C with LNA/PA Circuit Diagram and PCB Diagram - Price: $300 USD

Copyright

The articles on this site are all original and the copyright belongs to Zhang Xiaolong.

Anyone can reprint, but the source and author information must be indicated.